Z997R shown with 60-in. (152-cm) 7-Iron PRO Mulch On Demand (MOD) mower deck
Z997R shown with 72-in. (183-cm) 7-Iron PRO side-discharge mower
There are four mower-deck options available for the Z997R Diesel ZTrak Mower:
- The 60-in. (152-cm) 7-Iron™ PRO side-discharge deck issuited to a variety of mowing jobs, including trimming and grooming.
- The 60-in. (152-cm) 7-Iron PRO Mulch On Demand™(MOD) mower deck can be converted from a wide-open, side-discharge mode to a fully chambered mulching mode with a single move of a lever.
-
The 60-in. (152-cm) rear-discharge mower deck is fabricated from 7-gauge, 0.179-in. (4.5-mm) steel for added deck strength and long life. It is ideally suited for areas where people are present.
-
The 72-in. (183-cm) 7-Iron PRO side-discharge deckis suited to a variety of mowing jobs, including trimming and grooming on larger properties.
SPINDLE HOUSINGS ARE MADE OF DUCTILE CAST IRON FOR EXTRA DURABILITY
Cast-iron mower spindle
Cast-iron mower spindle
On every commercial mower deck, there are three 1-in.(25-mm) spindles that are cold-forged and heat-treated for strength.Spindles are supported by precision ball bearings that provide great performance and reliability.
The blade spindles are designed for many hours of trouble-free operation:
- The spindle housings are made of ductile cast iron and have a gusseted design that puts the reinforcement where it is needed.
- Ductile cast-iron material provides increased impact strength.
- Strength of cast iron protects against damage from blade impacts.
- Grease fitting is mounted at the top for easy access.
- Grease pressure-relief valve minimizes seal damage from overfilling with grease and keeps debris from entering housing.
- The 8-in. (20.3-cm) diameter housing distributes loads and impacts to minimize deck-shell damage.
- Spindle assembly can be rebuilt.
60-IN. (152-CM) 7-IRON PRO MOWER DECK
60 in. (152-cm) 7-Iron PRO mower deck shown
Features include:
- Higher blade tip speed - 18,000 fpm (5486 m/min) gives more blade strikes per distance of forward travel.
- Front baffleis designed to better manage airflow and control clippings.
- Ductile cast-iron blade-spindle housings have a gusseted design for extra reinforcement.
- Spindle-pocket reinforcement for even greater structural durability.
- A raised discharge chuteprovides even clipping distribution.
- 7-gauge, 0.179-in. (4.5-mm) steel constructiongives commercial durability.
- 3-spindle designprovides asmooth, even cut.
- Plastic discharge deflector reduces damage to foliage and resistsbending.
- Formed, steel-deck design is stamped from a single sheet of steel to eliminate corners where grass can collect.
- Deep deckgives increased vacuum action that reduces dropped clippings.
- Shaft drive from engine to mower gives excellent reliability.
- Belt drive efficiently transfers power from gearbox to spindles.
- Spindle zerks are greasable from the top.
- Quick-change cutting-height adjustment is easy to use.
- Tricycler™ mulching kits are available.
- Blade overlap of 1.57 in. (40 mm), nearly 0.79 in. (20 mm) greater than previous decks, reduces the number of missed grass blades.
60-in. (152-cm) Side-Discharge | 60-in. (152-cm) Side-Discharge Mulch on Demand | 60-in. (152-cm) Rear-Discharge | 72-in. (183-cm) | |
Mower type | 7-Iron™ II - stamped deck | 7-Iron II - stamped deck | 7-gauge fabricated deck | 7-Iron II - stamped deck |
Mower compatibility: | ||||
Discharge | Side | Side | Rear | Side |
Mulching capability | Optional field-installed kit | Standard Mulch on Demand included | Not available | Optional field-installed kit |
Cut-height range | 1.5-5 in. (3.8-12.7 cm) | 1.5-5 in. (3.8-12.7 cm) | 1.5-5 in. (3.8-12.7 cm) | 1.5-5 in. (3.8-12.7 cm) |
Cutting width | 60 in. (152 cm) | 60 in. (152 cm) | 60 in. (152 cm) | 72 in. (183 cm) |
Height-of-cut adjustment | Turning knob with foot assist | Turning knob with foot assist | Turning knob with foot assist | Turning knob with foot assist |
High lift blades: | ||||
Blade length | 21 in. (53 cm) | 21 in. (53 cm) | 21 in. (53 cm) | 25 in. (64 cm) |
Blade width | 3 in. (7.6 cm) | 3 in. (7.6 cm) | 3 in. (7.6 cm) | 3 in. (7.6 cm) |
Blade thickness | 0.25 in. (6.35 mm) | 0.25 in. (6.35 mm) | 0.25 in. (6.35 mm) | 0.25 in. (6.35 mm) |
Blade tip speed | 17,480 fpm (5.3 km/m) | 17,480 fpm (5.3 km/m) | 17,480 fpm (5.3 km/m) | 17,500 fpm (5.3 km/m) |
Number of blades | Three | Three | Three | Three |
Blade spindles: | ||||
Bearings | Grade=ABEC-1 | Grade=ABEC-1 | Grade=ABEC-1 | Grade=ABEC-1 |
Spindles | Cold-forged and heat-treated | Cold-forged and heat-treated | Cold-forged and heat-treated | Cold-forged and heat-treated |
Spindle housings | Ductile cast-iron | Ductile cast-iron | Ductile cast-iron | Ductile cast-iron |
Wheels: | ||||
Front anti-scalp rollers | Standard | Standard | Standard | Standard |
Rear anti-scalp rollers | Standard | Standard | Standard | Standard |
Deck construction | One-piece stamped steel | One-piece stamped steel | Fabricated steel | One-piece stamped steel |
Deck thickness | 7-gauge steel 0.179 in. (4.5 mm) | 7-gauge steel | 7-gauge steel | 7-gauge steel |
NOTE: The 60-in. (152-cm) 7-Iron PRO MOD mower deck is not available in Australia/New Zealand.
72-IN. (183-CM) 7-IRON PRO MOWER DECK
Z997R with 72-in. (183-cm) 7-Iron PRO mower
72-in. (183-cm) 7-Iron PRO mower deck
Features include:
- Higher blade tip speed - 18,000 fpm (5486 m/min)gives more blade strikes per distance of forward travel.
- Front baffle is designed to manage airflow and control clippings.
- Spindle pocket reinforcement gives greater structural durability.
- Ductile cast-iron blade-spindle housings have a gusseted design for extra reinforcement.
- A raised discharge chute provides even clipping distribution.
- 7-gauge, 0.179-in. (4.5-mm) steel constructiongives commercial durability.
- 3-spindle designgives a smooth, even cut.
- Plastic discharge deflector reduces damage to foliage and resists bending.
- Formed, steel-deck design is stamped from a single sheet of steel to eliminate corners where grass can collect.
- Deep deck gives increased vacuum action that reduces dropped clippings.
- Shaft drive from engine to mower gives excellent reliability.
- Belt drive efficiently transfers power from gearbox to spindles.
- Spindle zerks are greasable from the top.
- Quick-change cutting-height adjustment is easy to use.
- Tricycler mulching kits are available.
- Blade overlap of 1.57 in. (40 mm), nearly 0.79 in. (20 mm) greater than previous decks, reduces the number of missed grass blades.
60-IN. (152-CM) 7-IRON PRO MOD MOWER DECK
60-in. (152-cm) 7-Iron PRO MOD mower deck shown
MOD mower mulch control lever
Key features of the 7-Iron PRO MOD mower deck:
-
Deck can be converted from a wide-open side discharge mode to a fully chambered mulching mode with a single move of a lever.
-
Deck is stamped from 7-gauge, 0.179-in. (4.5-mm) steel to minimize the number of welds and provide a smooth underside, with fewer sharp corners, for reduced material buildup.
-
Significantly fewer welds on the deck shell to wear or break; it is stamped from a single sheet of steel rather than multiple fabrications. Anti-skid step on the deck provideseasy machine mounting.
-
Higher blade tip speed than many competitors - 18,000 fpm (5486 m/min) for more blade cuts per inch mowed.
-
The rounded corners of the stamped deck help distribute impact stress to reduce the potential of damage when the mower contacts trees, rocks, curbs, and other fixed obstacles.
-
A deep-deck design of 5.5 in. (14 cm) delivers excellent airflow so material can be processed quickly and efficiently.
-
The wider and higher discharge opening provides even clipping dispersal for an excellent finished appearance in all conditions.
-
1-in. (25-mm) cold-forged spindles are heat-treated for strengthand are supported by ball bearings, providing reliability and performance; ductile cast-iron blade-spindle housings have a gusseted design for extra reinforcement.
-
The front edge is raised above the blade plane to allow even cutting of tall grass and reinforced with a square bar for durability. The front baffle has been redesigned to better manage airflow and control clippings.
-
Dual-captured anti-scalp wheels provide deck flotation over even the toughest terrain.
60-IN. (152-CM) REAR-DISCHARGE MOWER DECK
60-in. (152-cm) rear-discharge mower deck
The 60-in. (152-cm) rear-discharge mower is ideally suited for:
- Areas where people are present
- Schools
- Parks
- Playgrounds
- Traffic areas (city boulevards, roadsides, etc.)
- Conditions and application areas with long grass and weeds where wide dispersal of grass (park areas, roadsides, etc.) is not a concern
Some government bids specify that the mower is equipped with a rear discharge deck:
- Deck is fabricated from 7-gauge, 0.179-in. (4.5-mm) steel for added deck strength and long life.
- 0.75-in. (1.9-cm) solid steel bar is welded to the mower deck perimeter for additional strength.
- Deep-deck design increases airflow so more material can be processed.
- Operator can trim with either side.
- Unique baffling system that is designed to reduce clumping and windrowing usually associated with rear-discharge mowers.
- 1-in. to 5-in. (2.54-cm to 12.7-cm) cutting heights, in 0.5-in. (1.3-cm) increments, allow the operator to match mowing conditions.
- Gauge wheels, rollers, or side-mounted skid shoes lift the deck over uneven surfaces for a well-groomed appearance.
- Spindles can be greased without removing belt shields.
- 1-in. (25-mm) cold-forged spindles are reliable.
- Heat-treating of the spindlesprovides additional strength.
- Ductile cast-iron blade-spindle housings have a gusseted design for extra reinforcement.